Variety: 1L, 3L, 5L, 10L, 20L, 35L, 55L, 75L, 110L.

Use: Successful mixing of the rubber components in rubber processing line.

Certification: SGS CE, as properly as CZPT: 2008

Customers: Far more than twenty locations, Asia, CZPTpe, North America, South The usa

Mixing chamber:

It is made up of a “W” condition human body and two facet boards created of substantial high quality metal plates by signifies of extrusion forming and welding, which are jacked to consider the flow of cooling drinking water or steam. It is plated with tough chrome on its inner walls.

Thermal Resistance:

There is a plug-in thermal resistance in middle part of the bottom of the chamber to be linked to electrical program to inspect and display the temperate.

Rotor:

It is created to the hollow blades of Banbury sort. The hollows are connected with axial hole of rotor shaft utilised as cooling or heating passage. The top edges of blades and the end faces of ~ rotor shaft are floor welded with cobalt-base hard alloy and grinding, then plating with tough chrome and polishing.

Cooling/heating technique:

A frequent piping system is adopted for possibly cooling or heating content in mixing procedure. By way of the program cooling water or steam is fed in 3 techniques to the cavities of the rotors blades, the mixing chamber and the leading ram.

Tilting mechanism:

It is made up of a rotor with brake, cycloidal equipment reducer, TP kind worm and worm gear, etc…It is ready to actuate the mixing chamber tilting by 140° About the entrance rotors.

Dust sealing device:

At the joint amongst the leading of the mixing chamber and the cantilevered arm of the device frame, the dust sealing assemblies with curved slotted partings are used acquiring an outstanding and reputable sealing goal.

The conclude confront of the rotor is sealed by end contact sealing with nor oil-lubrication and is seals properly and is dress in-resistant and sturdy.

Primary driving system:

The portion is made up with main motor, reducer, connecting gears. It realizes odd-pace rotation of the rotors with running encounter 1 other.

Hard Gear Gearbox, 6 degree meshing

Pneumatic control technique:

Pneumatic handle program is managed by XG purchase. The bi-directional air cylinder can make the ram up or down. In case the over load occurs in the mixing chamber, the leading ram can be raised instantly or manually if needed, so as to safeguard motor from overload.

CZPT control system

CZPTed PLC device and electric control elements which are all imported products or imported engineering products are adopted in the electric powered handle technique as to elevate management dependability.