China WS55-220 DC Motor Driver DC 48V 500W CNC Brushless Spindle 3 phase BLDC Motor Driver Controller for Electric Power Tools supplier

Model Amount: WS55-220
Warranty: 1 Year
Situation: unique new
Payment phrase: T.T Paypal Western Union and many others
Shipping: Fedex DHL UPS etc
MOQ: 1PSC
Packaging Details: regular package deal
Port: hong kong HangZhou


Features:

  • WS55-220 is a high overall performance,value-efficient 3 stage BLDC motor controller.Voltage selection is from 20VDC to 50VDC.
  • The controller can travel the DLDC motor with Corridor or with no Hall.
  • The driver is dependent on advanced engineering and be offered with high , high , low noise, minimal vibration, in excess of existing defense, overload protection, considerably less section line. security, section line brief defense, alarm output, signal output, good unfavorable rotation handle and so forth.
  • This controller can be used in small equipment, Electrical Power Tools, DC 5-30V 5A DC Motor Controller PWM Adjustable Pace Digital exhibit encoder duty ratio frequency MAX 15A ZK-MG motor controller exhaust Supporter, CZPT grinding equipment, Vibrating motor and so forth.
  • Exterior potentiometer management/external voltage handle.
  • With overvoltage safety, over-recent defense, locked-rotor defense.

  • Specs:
    Rated voltage: twenty to fifty VDCRated existing: 12ACurrent restricting: 15A
    Maximum : 20000RPM( the specific relies upon on the motor alone and load)
    Storage temperature: -20°~+65°Usage setting: void immediate speak to with dust, fumes and corrosive gasesTemperature: -45°Humidity: < 80%, no frost, frost freeShock: 5.9m/ MA Storage humidity: ~95%RHSize: 9.5 * 6 * 3.5cm / 3.74 * 2.36 * 1.38inchWeight: 258g

    Depth:
    one.Two modes of regulation:Exterior potentiometer: through this potentiometer regulationExternal voltage: exterior 10VDC voltage regulation Large Effectiveness Nmb Bearing N45uh Curved Magnet 6385 V5. Esk8 5000w 24v 48v 36v 56v Electrical Skateboard Brushless Dc Motor Observe: The 2 regulation can not be employed concurrently
    2. output PG sign: There is a 5v- pulse output between the port and the floor.The output frequency is established to P (Hz), the motor class logarithm is N, and the is F (RPM), then the output frequency is P=F*N/60.3. larm output LM sign:There is an 5V alarm pulse output amongst the port and the floor.4. Optimistic inversion function:
    F/R:Fiddle the toggle change on the corresponding side, the motor steering direction can be altered. For the toggle swap, the white part is up and down, then twang it up and down. For the toggle switch, the white element is horizontal, and the twang horizontally.5. Start-stop (two manage modes):1. External change EN: Transfer by means of change.2. Facet toggle switch EN: for the toggle change, the white part is up and down, then down for the start for the toggle change, the white component is horizontal, Personalized Unique One Two Piece Rapid Launch One Double Break up Shaft Collar Clamp then dial to startNote: You can only switch 1 handle at the same time, 1 of the switches is shut, and the other 1 is valid.
    six. Locked-rotor security:If the motor stops doing work, swap on the electricity yet again to start.7. Power gentle: Inexperienced mild: electrical power on and off8. Status light: Purple mild: 2 flashes in standby time, soon after commencing, extinguish. 9. Insulation resistance: &100M at ambient temperature and atmospheric pressure10. Insulation strenh: t regular temperature and force, .5KV, 1 minutes

    Connection of ~ 10V

    Relationship of potentiometer

    Proportions

    Our Providers
    Please get in touch with us if you have any necessity!!!

    one. Anytime, HangZhou servo motor 1KW flange 90MM 2500rpm 4N.m cnc servos router ac servo motor drive kit 90M 0571 1+A4 we are delighted to get your get and any related requests.2. Guarantee the products meet up with the quality expectations.3. Ensure the goods will be delivered on time.4. Give heat and friendly provider and following-sale services. 5. We will reply you inside of 24 hours.6. OEM high quality and authentic quality are suitable.7. About the warranty, if you have any issue about the items following acquired it,you can inform us on time.We will make confident to give you a satisfactory solution. 8. For far more particulars and latest price, you should feel totally free to get in touch with us.

    What Is a Gear Motor?

    A gear motor is an electric motor coupled with a gear train. It uses either DC or AC power to achieve its purpose. The primary benefit of a gear reducer is its ability to multiply torque while maintaining a compact size. The trade-off of this additional torque comes in the form of a reduced output shaft speed and overall efficiency. However, proper gear technology and ratios provide optimum output and speed profiles. This type of motor unlocks the full potential of OEM equipment.

    Inertial load

    Inertial load on a gear motor is the amount of force a rotating device produces due to its inverse square relationship with its inertia. The greater the inertia, the less torque can be produced by the gear motor. However, if the inertia is too high, it can cause problems with positioning, settling time, and controlling torque and velocity. Gear ratios should be selected for optimal power transfer.
    The duration of acceleration and braking time of a gear motor depends on the type of driven load. An inertia load requires longer acceleration time whereas a friction load requires breakaway torque to start the load and maintain it at its desired speed. Too short a time period can cause excessive gear loading and may result in damaged gears. A safe approach is to disconnect the load when power is disconnected to prevent inertia from driving back through the output shaft.
    Inertia is a fundamental concept in the design of motors and drive systems. The ratio of mass and inertia of a load to a motor determines how well the motor can control its speed during acceleration or deceleration. The mass moment of inertia, also called rotational inertia, is dependent on the mass, geometry, and center of mass of an object.
    Motor

    Applications

    There are many applications of gear motors. They provide a powerful yet efficient means of speed and torque control. They can be either AC or DC, and the two most common motor types are the three-phase asynchronous and the permanent magnet synchronous servomotor. The type of motor used for a given application will determine its cost, reliability, and complexity. Gear motors are typically used in applications where high torque is required and space or power constraints are significant.
    There are two types of gear motors. Depending on the ratio, each gear has an output shaft and an input shaft. Gear motors use hydraulic pressure to produce torque. The pressure builds on one side of the motor until it generates enough torque to power a rotating load. This type of motors is not recommended for applications where load reversals occur, as the holding torque will diminish with age and shaft vibration. However, it can be used for precision applications.
    The market landscape shows the competitive environment of the gear motor industry. This report also highlights key items, income and value creation by region and country. The report also examines the competitive landscape by region, including the United States, China, India, the GCC, South Africa, Brazil, and the rest of the world. It is important to note that the report contains segment-specific information, so that readers can easily understand the market potential of the geared motors market.

    Size

    The safety factor, or SF, of a gear motor is an important consideration when selecting one for a particular application. It compensates for the stresses placed on the gearing and enables it to run at maximum efficiency. Manufacturers provide tables detailing typical applications, with multiplication factors for duty. A gear motor with a SF of three or more is suitable for difficult applications, while a gearmotor with a SF of one or two is suitable for relatively easy applications.
    The global gear motor market is highly fragmented, with numerous small players catering to various end-use industries. The report identifies various industry trends and provides comprehensive information on the market. It outlines historical data and offers valuable insights on the industry. The report also employs several methodologies and approaches to analyze the market. In addition to providing historical data, it includes detailed information by market segment. In-depth analysis of market segments is provided to help identify which technologies will be most suitable for which applications.
    Motor

    Cost

    A gear motor is an electric motor that is paired with a gear train. They are available in AC or DC power systems. Compared to conventional motors, gear reducers can maximize torque while maintaining compact dimensions. But the trade-off is the reduced output shaft speed and overall efficiency. However, when used correctly, a gear motor can produce optimal output and mechanical fit. To understand how a gear motor works, let’s look at two types: right-angle geared motors and inline geared motors. The first two types are usually used in automation equipment and in agricultural and medical applications. The latter type is designed for rugged applications.
    In addition to its efficiency, DC gear motors are space-saving and have low energy consumption. They can be used in a number of applications including money counters and printers. Automatic window machines and curtains, glass curtain walls, and banknote vending machines are some of the other major applications of these motors. They can cost up to 10 horsepower, which is a lot for an industrial machine. However, these are not all-out expensive.
    Electric gear motors are versatile and widely used. However, they do not work well in applications requiring high shaft speed and torque. Examples of these include conveyor drives, frozen beverage machines, and medical tools. These applications require high shaft speed, so gear motors are not ideal for these applications. However, if noise and other problems are not a concern, a motor-only solution may be the better choice. This way, you can use a single motor for multiple applications.
    Motor

    Maintenance

    Geared motors are among the most common equipment used for drive trains. Proper maintenance can prevent damage and maximize their efficiency. A guide to gear motor maintenance is available from WEG. To prevent further damage, follow these maintenance steps:
    Regularly check electrical connections. Check for loose connections and torque them to the recommended values. Also, check the contacts and relays to make sure they are not tangled or damaged. Check the environment around the gear motor to prevent dust from clogging the passageway of electric current. A proper maintenance plan will help you identify problems and extend their life. The manual will also tell you about any problems with the gearmotor. However, this is not enough – it is important to check the condition of the gearbox and its parts.
    Conduct visual inspection. The purpose of visual inspection is to note any irregularities that may indicate possible problems with the gear motor. A dirty motor may be an indication of a rough environment and a lot of problems. You can also perform a smell test. If you can smell a burned odor coming from the windings, there may be an overheating problem. Overheating can cause the windings to burn and damage.
    Reactive maintenance is the most common method of motor maintenance. In this type of maintenance, you only perform repairs if the motor stops working due to a malfunction. Regular inspection is necessary to avoid unexpected motor failures. By using a logbook to document motor operations, you can determine when it is time to replace the gear motor. In contrast to preventive maintenance, reactive maintenance requires no regular tests or services. However, it is recommended to perform inspections every six months.

    China WS55-220 DC Motor Driver DC 48V 500W CNC Brushless Spindle 3 phase BLDC Motor Driver Controller for Electric Power Tools     supplier China WS55-220 DC Motor Driver DC 48V 500W CNC Brushless Spindle 3 phase BLDC Motor Driver Controller for Electric Power Tools     supplier
    editor by czh 2023-02-21

    electric motor

    As one of leading electric motor manufacturers, suppliers and exporters of products, We offer electric motor and many other products.

    Please contact us for details.

    Mail:[email protected]

    Manufacturer supplier exporter of electric motor

    Recent Posts