Geared Stepper Motor CE and RoHS Approved

Geared Stepper Motor CE and RoHS Approved

Geared stepper motor with various reduction ratio, CE and ROHS approved 

(Product) (Specification)
Phase angle 1.8°
Tempareture Increase 80ºC max
Ambient Temperature Selection -20ºC- +50ºC
Insulation Resistance 100MΩ Min., 500VDC
Dielectric Toughness 820VAC for 1s 3mA
Shaft Radial Play .02 Max.(450g-load)
Shaft Axial Enjoy .08 Max.(450g-load)
Max. radial pressure 75-220N(20mm from the flange)
Max. axial pressure fifteen-60N

 

Stepper Motor Type:

 

NEMA17

 

Design No. Action Angle Motor Length Recent Resistance Inductance Keeping torque Sales opportunities Detent Torque
(°) (L)mm A Ω Mh kg.cm No. g.cm
JK42HS34-0956 1.8 34 .ninety five 4.2 two.five 1.6 six 120
JK42HS34-0406 1.eight 34 .four 24 fifteen one.six six a hundred and twenty
JK42HS34- 0571 one.eight 34 .31 38.5 21 1.6 6 120
JK42HS34-1334 1.8 34 1.33 2.1 two.five 2.two four one hundred twenty
JK42HS40-1206 1.8 40 one.two three.3 three.2 two.six 6 a hundred and fifty
JK42HS40-0806 1.eight forty .eight 7.five 6.seven two.six six one hundred fifty
JK42HS40-0406 1.8 forty .four 30 thirty two.six 6 a hundred and fifty
JK42HS40-1684 1.eight forty 1.sixty eight one.sixty five three.2 three.six 4 a hundred and fifty
JK42HS48-1206 1.eight 48 1.two 3.3 two.8 3.17 6 260
JK42HS48-0806 1.8 48 .eight seven.5 six.three three.seventeen six 260
JK42HS48-0406 1.8 48 .four 30 25 three.17 six 260
JK42HS48-1684 1.eight 48 1.68 1.sixty five two.8 four.four four 260
JK42HS60-1206 1.8 60 1.two 6 7 five.six 6 280
 

     

     NEMA23

    Design No. Step Angle Motor Length Recent Resistance Inductance Holding torque Sales opportunities Detent Torque
    (°) (L)mm A Ω Mh N.m No. g.cm
    JK57HS41-1006 one.eight forty one 1 five.2 5.5 .39 6 250
    JK57HS41-2006 1.8 forty one two one.four one.four .39 six 250
    JK57HS41-3006 1.eight forty one three .sixty three .six .39 6 250
    JK57HS41-2804 one.eight 41 2.eight .7 one.4 .fifty five 4 250
    JK57HS51-1006 1.8 51 one six.6 eight.two .seventy two 6 three hundred
    JK57HS51-2006 1.8 51 2 one.65 2.two .seventy two 6 300
    JK57HS51-3006 one.eight fifty one three .seventy four .nine .72 six three hundred
    JK57HS51-2804 1.eight 51 two.8 .83 2.two 1.01 4 350
    JK57HS56-1006 1.8 56 one seven.4 10 .9 six 350
    JK57HS56-2006 one.8 56 two 1.8 2.5 .nine six 350
    JK57HS56-3006 one.8 56 three .75 one.1 .9 6 350
    JK57HS56-2804 1.8 56 two.8 .9 two.five one.26 4 350
    JK57HS76-1006 1.8 76 one 8.six fourteen one.35 six 600
    JK57HS76-2006 1.eight seventy six two two.25 three.6 1.35 6 600
    JK57HS76-3006 1.eight seventy six three 1 1.6 1.35 six 600
    JK57HS76-2804 1.eight 76 two.eight 1.thirteen three.six 1.89 four 600
    JK57HS82-3004 1.eight eighty two 3 1.two 4 2.2 four 1000
    JK57HS82-5004 one.eight eighty two five .6 1.five two.2 4 1000
    JK57HS112-3004 1.8 112 3 one.six six.eight 2.8 4 1200
    JK57HS112-4204 one.8 112 four.2 .9 3.8 2.8 four 1200

     

     

    NEMA34

     

    Product No. Stage Angle Motor Length Existing Resistance Inductance Holding torque Leads Detent Torque Rotor Inertia
    (°) (L)mm A Ω Mh N.m No. g.cm g.cm²
    JK86HS67-5904 1.8 67 5.nine .28 one.seven three.four 4 .8 one thousand
    JK86HS67-2808 1.8 sixty seven two.eight one.4 3.9 three.4 8 .8 1000
    JK86HS78-5504 one.eight seventy eight 5.5 .46 four 4.6 4 one.two 1400
    JK86HS78-4208 1.8 78 four.2 .75 three.four four.6 8 1.2 1400
    JK86HS115-4208 1.eight a hundred and fifteen six .six six.five 8.7 four two.four 2700
    JK86HS115-6004 one.8 one hundred fifteen four.two .nine six 8.7 eight 2.four 2700
    JK86HS155-6204 1.eight a hundred and fifty five six.two .75 9 12.2 4 3.6 4000
    JK86HS155-4208 1.8 one hundred fifty five 4.2 one.twenty five eight 12.two 8 three.six 4000

     

     

    Gear Box Parameters:

     

    CZPT Information amount 1 level 2
    Ratio four,five,7,9,ten sixteen,20,25,28,35,36,forty,45,49,fifty,sixty three,70,eighty one,ninety,one hundred
    Rated load Nm 6 twenty five
    Max. rated load Nm 12 40
    Effeciency % ninety five 90
    Return big difference arcmin ≤15 ≤25
    Rated enter speed rpm 3000 3000
    Max.input speed rpm 5000 5000
    Defense quality IP 65 65
    Lubrication   Grease Grease
    Sounds Db ≤45 ≤45
    Functioning life h -20000 -20000

    Applications:

     

    Used for robots stepper motor,
    Digital automatic gear stepping motor,
    Health-related instrument stepping motor,
    Marketing instrument stepper motor,
    Lighting& audio gear stepper motor,
    Printer stepper motor, textile machinery stepper motor.
    Cnc router stepper motor.

     
    Organization Demonstrate:

    HangCZPT JINGKONG MOTOR & CZPT Equipment Co.ltd is a higher-tech enterprise that specializes in planning and generating Hybrid Stepper Motor, Gear Motor, CZPT motor, Brushless dc Motor, Driver and some associated components.

     

    Our Equipment fields refer to robot, electronic gear, health-related instrument, advertisement instrument, lighting & audio products, 3D printer, texile machine and CNC device.

     

    All our goods have attained CE certification, compliance with EU ROHS expectations.

    Welcome Domestic & foreign customers pay a visit to and cooperation!

    We aslo provide Stepper motor Kits, linear stepper motor, Dc motor, Brake stepper motor, Stepper motor with Encoder, Adaptable Coupling, Pully, Electrical power offer, Breakout Board and so on..

     

     

    Geared Stepper Motor CE and RoHS Approved

    Tags

    electric motor

    As one of leading electric motor manufacturers, suppliers and exporters of products, We offer electric motor and many other products.

    Please contact us for details.

    Mail:[email protected]

    Manufacturer supplier exporter of electric motor

    Recent Posts