Spot Supply of Small and Medium DC Motor in Z4-315-21 160kw 440V 500rpm DC Motor

Spot Supply of Small and Medium DC Motor in Z4-315-21 160kw 440V 500rpm DC Motor

Merchandise Description:
DC motor is a rotating motor that can convert DC electric vitality into mechanical vitality (DC motor) or mechanical strength into DC electric power (DC generator). It is a motor that can change DC and mechanical power into a single one more. When it runs as a motor, it is a direct existing motor, which converts electrical strength into mechanical vitality when it operates as a generator, it is a direct existing generator, which converts mechanical power into electrical energy.

Merchandise Title Spot Offer of Small and Medium DC Motor in Z4-315-21 160KW 440V 500rpm DC Motor
Motor Type DC Motor,ACMotor,Stepper Motor,Asynchronous Motor ,Synchronous Motor
(CZPT machinery)
Composition framework The framework of DC motor must consist of two components: stator and rotor. The static portion of DC motor is named stator. The primary function of stator is to generate magnetic field, which is composed of base, primary magnetic pole, commutation pole, stop cap, bearing and brush unit. Working part is referred to as rotor, whose principal purpose is to create electromagnetic torque and inductive electromotive drive. It is the hub of strength conversion of DC motor. So it is also commonly known as armature, which consists of rotor, armature core, armature winding, commutator and enthusiast.
Product Z Kind
Seat variety Z315-Z1000
electricity sixty~2800kW
Voltage 220~1000V
Torque variety one.5 ~180kNm
Safety stage IP23, IP44
Cooling method IC06,IC17,IC37,IC81W
Working velocity  Constant Pace /Low Pace /Adjust Pace /Large Speed Other 
Primary classification DC Motor is a device that converts mechanical power into DC electricity. It is mainly employed as DC motor for DC motor, electrolysis, electroplating, smelting, charging and excitation electrical power supply of alternator. Though in spots in which DC electrical power is required, AC electricity rectifier is also utilised to transform AC into DC energy, but from some elements of performance, AC rectifier energy supply can not fully replace DC generator.  
Software DC motors are broadly utilised in tape recorders, video recorders, video discs, electrical shavers, hair dryers, digital watches, toys and so on.
Upkeep approach Expert motor servicing middle motor maintenance approach: cleansing stator and rotor – changing carbon brush or other parts – vacuum F pressure dipping paint – drying – Calibration balance.
1. Use surroundings should be often dry, motor surface area need to be stored clean, air ingestion need to not be hindered by dust, fibers and other hurdles.
two. When the thermal safety of the motor carries on to function, it ought to be ascertained whether the fault arrives from the motor or the overload or the environment benefit of the protecting gadget is too minimal. Following removing the fault, it can be place into procedure.
3, ensure that the motor is properly lubricated during procedure. The standard motor operates for about 5000 hrs, that is to say, lubricating grease need to be additional or changed. When bearing overheating or lubricating deterioration is found in operation, the hydraulic pressure should modify lubricating grease in time. When changing grease, the outdated grease need to be taken out, and the oil groove of bearing and bearing include ought to be washed with gasoline. Then ZL-3 lithium grease need to be stuffed with one/2 (two poles) and 2/three (four poles, six poles and 8 poles) of the cavity in between the inner and outer rings of the bearing.
four. When the existence of the bearing is more than, the vibration and sound of the motor will enhance obviously. When the radial clearance of the bearing reaches the pursuing benefit, the bearing need to be changed.
5, when removing the motor, it is Okay to take away the rotor from the shaft extension or the non extension stop. If it is not essential to unload the enthusiast, it is a lot more handy to consider out the rotor from the non-axle extension stop. When pulling out the rotor from the stator, the stator winding or insulation ought to be prevented from being ruined.
6. When replacing the windings, the sort, measurement, turns and gauges of the first windings have to be recorded. When these information are missing, they ought to be obtained from the company and the original made windings should be altered at will, which often deteriorates one or a number of functionality of the motor or even makes it impossible to use them.



Spot Supply of Small and Medium DC Motor in Z4-315-21 160kw 440V 500rpm DC Motor


electric motor

As one of leading electric motor manufacturers, suppliers and exporters of products, We offer electric motor and many other products.

Please contact us for details.

Mail:[email protected]

Manufacturer supplier exporter of electric motor

Recent Posts