Yrkk Series High Voltage Wound Rotor Slip Ring Motor

Yrkk Series High Voltage Wound Rotor Slip Ring Motor

The power stage, installation dimensions and electrical efficiency of the 6KV high-voltage slip ring three-period asynchronous motor are in compliance with related IEC standards. The basic installation method of the motor is the horizontal base angle (IMB3), the doing work technique is the continuous operating system (S1), and the wound rotor is manufactured of Class F insulation materials.
The bearing of 6KV large-voltage wound rotor slip ring motor has two varieties of rolling bearing and sliding bearing, relying on the motor electrical power and speed. If the motor has a substantial diploma of defense, the protection level of the bearing will also improve. The rated frequency of the motor’s power supply is 50Hz, the rated voltage is 6000V, and the fundamental sort of security is IP54. The motor slip ring housing can be safeguarded to IP22 or IP23. Other voltage, frequency and degree of security motors are also CZPT on request.
6KV high voltage winding rotor slip ring motor primary outlet box is IP54 defense grade, normally installed on the right aspect of the motor (facing the motor shaft extension stop), can also be put in on the left side of the motor according to the buy needs. Inside of the main outlet box, exterior There are individual ground terminals.
6KV higher-voltage winding slip ring motor increases the setting and bearing temperature measuring unit. It can also include heating device within the motor. The shaft extension essential of the motor generally adopts the tangential essential, and the motor carbon brush is not lifting framework.
6KV higher-voltage wound rotor slip ring motor can be employed to travel a selection of different equipment, this kind of as compressors, pumps, crushers, slicing device resources, transportation equipment and other mechanical equipment, in mining, equipment business, petrochemical sector, energy plants, etc. Utilized as prime mover in numerous industrial and mining enterprises. The motor utilized to push the blower, coal mill, rolling mill and winch must indicate the function and technological demands when ordering, and undertake special design and style to guarantee reputable operation.

Middle peak range: H355 ~ 1000mm
Electrical power range: 220kW ~ 10000kW
Amount of poles: two/4/6/8/ten/twelve
Rated voltage: 6000V/6600V
Rated frequency: 50HZ/60HZ
Safety amount: IP54 or IP55
Insulation course: F
Operate method: S1 (ongoing)
Cooling technique: IC611/IC616
Installation sort: IMB3
Motor relationship: Y (three outlet terminals in the junction box, the junction box from the extension of the spindle is situated on the right aspect of the foundation)
Altitude: no much more than 1000m
This variety of motor is ideal for use in environments where the ambient air temperature does not exceed forty ° C and there is no significant dust, the bare minimum ambient air temperature is -15 ° C, and there is no corrosive and explosive gasoline in the air (which can also be produced into a moist heat or high-altitude motor).

The 6KV high-voltage wound rotor slip ring motor can boost the big beginning torque at a small starting up present. The motor is appropriate for applications where the capability of the feeder line is insufficient to start off the squirrel-cage rotor, the starting up time is prolonged, the starting is frequent, and the little-assortment pace regulation is required. This series of motors has the benefits of higher efficiency, vitality conserving, minimal sounds, minimal vibration, gentle weight, reputable efficiency, convenient installation and servicing.

There are a lot of types of motor goods made and marketed by our company. The main products are substantial- and lower-voltage a few-phase asynchronous motors. The motor framework sorts consist of squirrel-cage variety and winding variety. Amongst them, high-voltage synchronous motors mainly support air compressors and mine ball mill equipment. use. We adhere to the service tenet of “emphasis on items, service with coronary heart” and give higher-high quality motor goods to clients.

ZCL CZPT Motor Technological innovation Co., Ltd. is a company largely engaged in the manufacture, analysis and growth and revenue of motor merchandise. The organization has a lot of sorts of motor items, like IEC regular motors. It is a skilled IEC motor company. Connected motor products have passed the product certification in China, the United States, Canada, CZPTpe, the Middle East and other locations, and the merchandise are exported to all over the world. Companies adhere to the “target on merchandise, service” organization philosophy, is fully commited to strengthening the quality of protected motor items and providers for buyers all around the entire world.

A lot more specifics, welcome to phone us!
Q: What are the payment phrases?
A: thirty% T/T in advance, 70% just before cargo
Q: What is your supply time?
A: Different designs with distinct time, ten-90 days right after purchase verified.
Q: What is your MOQ?
A: It depends on model.
Q: The place is your loading port?
A: ZheJiang or ZheJiang g Port, China.
 

Yrkk Series High Voltage Wound Rotor Slip Ring Motor

Tags

electric motor

As one of leading electric motor manufacturers, suppliers and exporters of products, We offer electric motor and many other products.

Please contact us for details.

Mail:[email protected]

Manufacturer supplier exporter of electric motor

Recent Posts