Z4 Series 90kw Medium DC Motor

Z4 Series 90kw Medium DC Motor

Solution Description:
DC motor is a rotating motor that can transform DC electric energy into mechanical strength (DC motor) or mechanical strength into DC electrical vitality (DC generator). It is a motor that can convert DC and mechanical strength into one an additional. When it runs as a motor, it is a immediate present motor, which converts electrical strength into mechanical strength when it runs as a generator, it is a immediate recent generator, which converts mechanical energy into electrical power.

Merchandise Name Z4 Sequence 90kw Medium DC Motor
Motor Sort DC Motor,ACMotor,Stepper Motor,Asynchronous Motor ,Synchronous Motor
(CZPT machinery)
Composition construction The composition of DC motor ought to consist of two elements: stator and rotor. The static element of DC motor is known as stator. The main function of stator is to generate magnetic area, which is composed of base, primary magnetic pole, commutation pole, stop cap, bearing and brush unit. Operating component is referred to as rotor, whose main function is to produce electromagnetic torque and inductive electromotive drive. It is the hub of strength conversion of DC motor. So it is also frequently known as armature, which is composed of rotor, armature core, armature winding, commutator and fan.
Design Z Variety
Seat amount Z315-Z1000
energy sixty~2800kW
Voltage 220~1000V
Torque variety one.five ~180kNm
Protection amount IP23, IP44
Cooling method IC06,IC17,IC37,IC81W
Operating pace  Constant Speed /Lower Pace /Change Speed /Large Speed Other 
Major classification DC Motor is a device that converts mechanical energy into DC energy. It is primarily employed as DC motor for DC motor, electrolysis, electroplating, smelting, charging and excitation electrical power provide of alternator. Despite the fact that in areas exactly where DC electricity is essential, AC power rectifier is also utilized to convert AC into DC electrical power, but from some factors of efficiency, AC rectifier electricity supply can not completely replace DC generator.  
Software DC motors are widely employed in tape recorders, movie recorders, video discs, electric shavers, hair dryers, digital watches, toys and so on.
Upkeep method Skilled motor routine maintenance centre motor upkeep approach: cleansing stator and rotor – replacing carbon brush or other areas – vacuum F pressure dipping paint – drying – Calibration stability.
1. Use atmosphere must be usually dry, motor area must be kept clean, air ingestion must not be hindered by dust, fibers and other obstructions.
2. When the thermal safety of the motor carries on to work, it should be ascertained whether or not the fault arrives from the motor or the overload or the environment value of the protecting unit is as well low. Right after getting rid of the fault, it can be put into procedure.
three, ensure that the motor is properly lubricated throughout operation. The general motor operates for about 5000 several hours, that is to say, lubricating grease ought to be added or replaced. When bearing overheating or lubricating deterioration is located in procedure, the hydraulic strain must change lubricating grease in time. When replacing grease, the outdated grease ought to be eliminated, and the oil groove of bearing and bearing cover must be washed with gasoline. Then ZL-3 lithium grease need to be filled with one/2 (two poles) and two/three (4 poles, six poles and 8 poles) of the cavity between the inner and outer rings of the bearing.
four. When the lifestyle of the bearing is more than, the vibration and sounds of the motor will increase certainly. When the radial clearance of the bearing reaches the pursuing price, the bearing should be replaced.
5, when taking away the motor, it is Ok to eliminate the rotor from the shaft extension or the non extension finish. If it is not needed to unload the enthusiast, it is more convenient to get out the rotor from the non-axle extension finish. When pulling out the rotor from the stator, the stator winding or insulation need to be prevented from getting broken.
six. When changing the windings, the sort, size, turns and gauges of the original windings need to be recorded. When these info are misplaced, they must be attained from the maker and the first developed windings need to be changed at will, which frequently deteriorates a single or numerous efficiency of the motor or even can make it not possible to use them.



Z4 Series 90kw Medium DC Motor


electric motor

As one of leading electric motor manufacturers, suppliers and exporters of products, We offer electric motor and many other products.

Please contact us for details.

Mail:[email protected]

Manufacturer supplier exporter of electric motor

Recent Posts