Z710-4 1600kw 660V 595-to-Large DC Motor

Z710-4  1600kw 660V 595-to-Large DC Motor

Product Description:
 
DC motor is a rotating motor that can convert DC electric strength into mechanical power (DC motor) or mechanical energy into DC electric strength (DC generator). It is a motor that can convert DC and mechanical power into one another. When it operates as a motor, it is a direct recent motor, which converts electrical energy into mechanical strength when it operates as a generator, it is a immediate recent generator, which converts mechanical energy into electrical energy.
 

Item Name Z710-4(U) 1600KW 660V 595-to-large DC Motor
Motor Variety DC Motor,ACMotor,Stepper Motor,Asynchronous Motor ,Synchronous Motor
(CZPT equipment)
Composition composition The construction of DC motor need to consist of two components: stator and rotor. The static portion of DC motor is named stator. The primary perform of stator is to generate magnetic discipline, which is composed of base, main magnetic pole, commutation pole, finish cap, bearing and brush system. Managing component is called rotor, whose major purpose is to create electromagnetic torque and inductive electromotive power. It is the hub of vitality conversion of DC motor. So it is also typically named armature, which is composed of rotor, armature main, armature winding, commutator and supporter.
Design Z Type
Seat variety Z315-Z1000
electricity 60~2800kW
Voltage 220~1000V
Torque range 1.five ~180kNm
Security amount IP23, IP44
Cooling mode IC06,IC17,IC37,IC81W
Functioning velocity  Constant Pace /Lower Velocity /Adjust Speed /Large Speed Other 
Principal classification DC Motor is a device that converts mechanical vitality into DC electricity. It is mostly employed as DC motor for DC motor, electrolysis, electroplating, smelting, charging and excitation electricity supply of alternator. Though in locations in which DC electrical power is needed, AC power rectifier is also employed to transform AC into DC electrical power, but from some elements of functionality, AC rectifier energy offer can not totally change DC generator.  
Software DC motors are widely employed in tape recorders, online video recorders, video clip discs, electric shavers, hair dryers, digital watches, toys and so on.
Servicing strategy Expert motor maintenance heart motor upkeep procedure: cleaning stator and rotor – replacing carbon brush or other parts – vacuum F stress dipping paint – drying – Calibration balance.
1. Use setting ought to be often dry, motor floor ought to be retained clean, air intake need to not be hindered by dust, fibers and other road blocks.
two. When the thermal defense of the motor carries on to function, it need to be ascertained no matter whether the fault will come from the motor or the overload or the setting price of the protective gadget is too minimal. After getting rid of the fault, it can be set into operation.
3, make sure that the motor is well lubricated for the duration of operation. The common motor runs for about 5000 hours, that is to say, lubricating grease ought to be extra or changed. When bearing overheating or lubricating deterioration is identified in operation, the hydraulic stress need to change lubricating grease in time. When changing grease, the previous grease need to be taken out, and the oil groove of bearing and bearing cover need to be washed with gasoline. Then ZL-3 lithium grease need to be loaded with 1/two (two poles) and 2/three (4 poles, 6 poles and eight poles) of the cavity amongst the interior and outer rings of the bearing.
four. When the existence of the bearing is above, the vibration and noise of the motor will improve obviously. When the radial clearance of the bearing reaches the following price, the bearing must be changed.
five, when taking away the motor, it is Alright to take away the rotor from the shaft extension or the non extension conclude. If it is not essential to unload the fan, it is much more hassle-free to get out the rotor from the non-axle extension end. When pulling out the rotor from the stator, the stator winding or insulation must be prevented from getting ruined.
six. When replacing the windings, the form, measurement, turns and gauges of the original windings need to be recorded. When these data are lost, they need to be attained from the maker and the first designed windings should be transformed at will, which frequently deteriorates 1 or many overall performance of the motor or even tends to make it not possible to use them.

 

 

Z710-4  1600kw 660V 595-to-Large DC Motor

Tags

electric motor

As one of leading electric motor manufacturers, suppliers and exporters of products, We offer electric motor and many other products.

Please contact us for details.

Mail:[email protected]

Manufacturer supplier exporter of electric motor

Recent Posts